Double Movement Three-roller Tripod Gate with Fingerprint Face RFID Card Access Control System

Description:

• The three-roller turnstile is stamped with 304 stainless steel plate. It has beautiful shape, rust-proof and durable. The system adopts standard electrical interface to the outside, which can easily integrate barcode card, ID card, IC card and other reading and writing devices into the device, so as to provide orderly and civilized passage for people in and out, and prevent illegal people from entering and leaving. At the same time, in order to meet the requirements of fire passage, the power is cut off and the pole is lowered in an emergency to organize people to evacuate. The movement of the three-roller turnstile has a shock absorber. When the three-roller turnstile is used for operation, the sound is very small, there is no impact, and the gate rod automatically slows down and returns to the center. At the same time, we also install a waterproof box inside the three-roller turnstile, and the waterproof box is made of galvanized sheet.
• The three-roller turnstile, also known as the three-roller turnstile, is an intelligent control terminal device for the entrance and exit of the pedestrian channel. It is specially used for gates where security checks or controls are required for people to enter and exit, such as canteens, hotels, office buildings, museums, gymnasiums, clubs, subways, stations, docks and other places

Functions:

Functional features of the three-roller turnstile

• It uses electromagnet locking and photoelectric unlocking, with long service life, high reliability and fast response speed.
• The whole system runs smoothly, with low noise and low impact.
• It has a self-checking function for incoming calls, and automatically restores to the locked state.
• There are multiple working modes to choose from, which can read cards in both directions, or read cards on one side and prohibit the other direction, or read cards on one side and allow free passage in the other direction.
• It has the function of power-off pole drop and power-on manual pole lift. After power-on, press the pole first and then lift the pole to the upper horizontal line.
• It has the function of power-off pole drop to meet the special needs of users and fire safety requirements.
• It has a unified and standard external electrical interface, which can be connected with various access control attendance or other control equipment, which is convenient for system integration, and can be remotely controlled and managed through the management computer.
• The number of people passing in the direction of passage can be counted through the access control software and presented to the manager, so that the manager knows the number of people passing in a certain direction.
• It has a clear direction of passage indication function, with intuitive LED passers-by indicating whether passage is allowed or prohibited.
• It has the card reading function with or without memory, and the user can set it through the mainboard keyboard according to their needs.
• Through software settings, the total number of people inside the venue can be limited to meet the special needs of some special occasions.
• It has an automatic reset function. After reading the card, if the passer does not pass within the specified time (4 seconds), the system will automatically cancel the passer’s access privileges.